273

2-channel high precision digital thermometer

It is designed for stable, high precision temperature measurement over the range of -200 to +660°C. To further enhance stability, the measurement electronics are encapsulated in a constant temperature oven.

Overview

The 2-channel digital thermometer is designed for stable, high precision temperature measurement over the range of -200 to +660°C. To further enhance stability, the measurement electronics are encapsulated in a constant temperature oven.

Dual Range, Dual Current Source

Each channel of the 273 has two distinct measuring ranges (0-100 ohms and 0-400 ohms) and associated current sources (1 mA and 300 uA respectively) allowing both 25 and 100 ohm nominal PRTs to span the full range of the Delta-Sigma A/D converter. This current source/range selection allows the system to maintain high resolution regardless of the PRT’s nominal value.

Full Current Reversal

Employing a full reversal current source, the 273 eliminates polarity sensitive errors normally inherent in DC measuring techniques. Accuracy is further enhanced by referencing all measurements to an internal reference resistor placed in series with the PRT to be measured. With this resistance ratio technique, the 273 accurately determines the probe resistance independent of the current source accuracy.

Graphical Display, Full Color Touch Screen

View your data numerically or graphically at any time. The color touch screen simplifies the user interface. Select parameters, change graph scaling, enter probe coefficients, and configure the system; all from the front panel.

Enter & Store Probe Coefficients

Enter your probe coefficients in ITS-90 format (the 273 even includes ITS-90 sub range 5) or use either the abc or αδβ coefficients of the Callendar - van Dusen equation. For standard industrial probes, pre-programmed IEC-751 standard coefficients are also selectable. Once entered, store the probe configuration in one of 10 memory locations for later retrieval and use. Each probe can be identified with a serial number and a short description.

Time Stamped Data Logging

With the large on board flash memory, the 273 can log tons of time stamped data with user selectable intervals from one second to several hours. This feature is great for unattended remote measurements and for creating a digital record of probe calibration data. Download the data to a PC at any time using HyperTerminal or any other simple terminal emulator program.

Communications

All 273 Thermometers include bi-directional RS-232 communications capability. You can retrieve readings in real time, download previously logged data, modify probe coefficients, change channel configurations, and more. The protocol is straight forward, intuitive, and powerful.

Specifications at a glance:-

Manufacturer reserves the right to change the specifications without prior notice.