| Order No |
5005-0030
|
| Accuracy of the time basis | ± 1 minute/week (20°C) |
| Attention | To operate the Micrologger, you need at least one
software PC Kit. Each PC Kit comprises the necessary software, a PC inferface cable, and detailed documentation. The software is available in German or English language. For radio operation, you need the logger, radio module, radio receiver, interface cable, and the Microlab Plus software. |
| Cradle Alarms | - Audible Alarm - Visual Alarm LED |
| Serial Communication Channels | - RS232 at 19.2 Kbps - USB at 1.5 Mbps |
| Cradle Memory | 2000 samples holding the sensor samples |
| Connectors | - 4-pin flat connection to the MicroLog - 4-pin flat connection to any MicroLog external sensor - Screw Terminal for External DC supply - Screw Terminal Board connections: - Power supply: DC 6-30V - External sensor - External contact sensor - High alarm open collector 30V/2A - Low alarm relay open collector 30V/2A |
| Power Supply | Internal Lithium battery, 3.6V External 6-30V, minimum 300mA |
| Technical Data | - EMC conformant to EN 301 489-3 - Type approved to ETS 300-220 - Usable range to 300m (75m indoors) - 418 (UK) & 433.92 MHz - 1 mW on 418 MHz 10 mW on 433.92 MHz - 2nd harmonic < -60dBc - 16 cm length antenna |