ROTRONIC calibration devices are small, airtight chambers that precisely fit ROTRONIC probes. The lower part of the device consists of a screw-on lid into which the humidity standard is poured onto an absorbent textile pad. The specified humidity is generated in
the calibration device after a stabilisation period of 30...180 minutes. The probe can then be calibrated or adjusted in comparison with the reference value of the humidity standard.
Product Description
Calibration Devices
Push-on calibration devices.
Gasket with O-ring and thumb screw
Use
Screw-on calibration devices. Gasket with seal face on probe.
Cannot be used for HC2-S probes
Use
Use
Calibration devices for special probes
Delivery:
