| Moisture Sensor | Range: -110°C to +20°C dewpoint ( -166°F to +68°F dewpoint ) Accuracy: ±2°C temperature corrected Repeatability: 0.8°C Response time: 95% of step change in 3 min. Sample flow: >1 LPM |
| Temperature Sensors |
Range:
-40°C to +70°C Accuracy: ±2°C |
|
Pressure
Sensor
|
0 to 150 PSIA ±1%, 316L stainless steel wetted parts |
| Ergonomics |
•
Comfortable to hold in hand, contoured body design, lightweight 1.75 Lbs
• Hook and magnet for easy temporary field securing / mounting • Easy to read graphic LCD display with user controlled backlight brightness (LCD is readable without
the backlight)
• Snap dome tactile membrane switches with dynamically assigned legends • Audible feedback upon button press as well as for warnings and alarms • Auto scaling graph / histogram on moisture measurement display for stability
verification
• Easy to use with verbose built-in context sensitive Help screens • Battery Saver, with user selectable Auto-power-down times, can also be disabled
• Built-in pressure measurement and pressure corrected moisture readings,simultaneously displayed with the uncorrected reading for
greater ease of understanding
• Verbose Status bar with indications, warnings and audible errors • User selectable locking with or without a password. • Built-in battery backed clock calendar |
| Electrical |
External AC Universal Power adapter (100-240VAC 50-60Hz) with
USB connector
Rechargeable Li-Ion battery, recharges through the USB connector from the PC or from the supplied universal power adapter
Sampling system and sensor are isolated from electrical interface and supply grounds
Measurement resolution of moisture sensor: 1pF
resulting in less than 0.01°C
External power and I/O: USB mini B female connector - IP67 / IP68 with Sealing Cap
|
| Mechanical |
1/8"
Swagelok® Inlet and Outlet fitting adapters for
the SAE/MS 5/16-24 ports.
All 316 Stainless Steel and PTFE wetted parts, small surface area stainless steel sampling chamber for fast response time.
Integral Sensor retraction into desiccant storage chamber for fast response-time when measuring low moisture
Enclosure Impact resistant (>7 Nm to EN 50014) Polyamide 12, IP65/EN 60529 ATEX hazardous area use (Ex II 2 G) approved (PTB 02 ATEX 1076U),
Flammability: UL 94 HB Abrasion resistant Polycarbonate display lens Dimensions- L: 7.36" (187mm) W: 4.17" (106mm) H: 1.97" (50mm) Weight Total: 1.75 Lbs (0.8 Kg) Pressure: 150 PSIA (10.3 Bar) |
| Temperature Range |
PPMa Analyzer: -20°C to +60°C Electronics: -40°C to +85°C
Moisture Sensor: -20°C to +60°C Pressure Sensor: -20°C to +85°C LCD operating: -20°C to +70°C storage: -30°C to +80°C Enclosure:
-40°C to +60°C
|
| Miscellaneous Features |
NIST traceable calibrations
Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H2O vapor pressure, grams of H2O / m3 and Lbs H2O /106 standard cubic feet in Natural Gas. (All units autoscaled)
Digital & Analog I/O: USB, 4/20mA with HART® Data logging - single point, multipoint, time stamping, each sample records: dewpoint,
temperature and pressure, ( memory > 8,000 samples)
Virtual Analyzer PC software for training and evaluation, allows the user to experience the exact interface on their own PC with voice explanations
|
